Télécharger Imprimer la page

Baier Elektrowerkzeuge BDB 8295 Traduction De L'original Du Mode D'emploi page 28

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
1
About this instruction
manual
This instruction manual contains all important
information necessary for safe handling of the dry
diamond drilling system.
In this instruction manual the drive unit is also
referred to as the "tool" or "machine".
This instruction manual only describes use of the
Baier BST 420 drill stand.
If using another drill stand, the corresponding
instruction manual must be followed.
Figure references
References to figures, which are located at the
beginning of the instruction manual are displayed in
the text with this symbol
reference is to Figure number 1).
1.1
Important information
Read the instruction manual
Before starting any work with or on the tool, this
instruction manual, the safety instructions and
the warnings must be read through carefully and
observed.
Always keep this instruction manual together
with the equipment.
An approved half-mask with filter must
be worn!
1.2
Symbols used in the instruction
manual
DANGER
"DANGER" indicates an imminent hazard, which
will result in immediate death or severe physical
injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
| 28 |
1
(here, for example, the
WARNING
"WARNING" indicates an imminent hazard, which
could result in death or severe physical injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
CAUTION
"CAUTION" indicates an imminent hazard, which
can result in minor or moderate physical injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
NOTE
"NOTE" indicates possible property damage, gives
use recommendations and helpful tips.
2
Safety Instructions
WARNING
Read all safety instructions, instruction illustrations
and technical specifications provided for this power
tool.
Failure to observe the safety instructions and
precautions can cause serious injuries.
Keep all safety instructions and precautions for
future reference.
The term "power tool" used in the safety instructions
refers to mains-operated power tools (with mains
power lead) and battery-operated power tools
(without mains power cable).

Publicité

loading