SilverCrest SAS 7.4 LI C2 Mode D'emploi page 26

Operation
CAUTION!
► The suction opening must always be open and may not be blocked . Block-
ages lead to overheating and damage to the motor .
NOTICES
► Make certain that the dust filter 0 is always inserted before using the
appliance .
► When vacuuming liquid, do not exceed the MAX marking in dirt container q .
1) Remove the handheld vacuum cleaner from the wall bracket 3 or, if you are
not using the wall bracket 3 remove the barrel plug 5 from the socket .
2) If required, place the appropriate nozzle in the suction opening .
The crevice tool 2 and the wet suction nozzle 1 are kept in the space-saving
accessory storage in the handle .
–
the crevice nozzle 2, to clean narrow and difficult to reach locations .
–
the wet suction nozzle 1 to vacuum up liquids .
NOTE
► After you have vacuumed up liquids, immediately clean the dirt container q .
Otherwise, bacteria or mould will build up inside! Ensure that the dust filter
bag 9 is completely dry before using the appliance again .
3) To switch the appliance on, slide the on/off switch 6 forwards . The charge
indicator lamp 7 lights up green .
4) When you have finished using the appliance, slide the on/off switch 6 to
the rear .
SAS 7.4 LI C2 GB │ IE │ 23 ■