Adventys ADV1731-A Manuel D'instructions page 3

POSABLE INDUCTION / FREE STANDING INDUCTION
AL2 3500 F AP
AFTER SALES SERVICE DATA
Opera ng Instruc ons
Servicing guide
DESCOVERALL DESCRIPTION
Manufacturing date
Type
Material type
CHARACTERISTICS
Power supply
Current at nominal voltage 230V
Maximum power returned (CEI)
Weight bare
Coil
Consump on in stand-by-state
DIMENSIONS
Packaging
Height - mm
Width - mm
Depth - mm
SECURITY AND PROBLEMS:
If you read on the keyboard a message ER.XX (with XX
01 to 19), see the following table.
Electroménager Professionnel / Professional Appliances
: FX
: ---
: 01/2019
: Electronique
: Stainless steel + steel
: 190V AC to 260VAC; 50 Hz or 60 Hz
: 16A
: >90%
: 7 Kg
: 2 coils 180 mm of diameter
: 5 W
Product Embedding
110 Mm -
360 Mm -
560mm -
WARNING !
PEOPLE EQUIPED WITH PACEMARKERS OR ACTIVE IM-
PLANTS.
The hob complies with electromagne c standards. This in-
duc on hob therefore fully meets legal requirements
(direc ves 89 / 336 / CEE). It has been designed so that it
does not interfere with working or other electric appliances
provided that they respect the same regula ons.
This induc on hob generates electromagne c fields in its
very close environment.
VOLTAGE WARNING!
This is an electronic product. Some parts of the product are
under electric, and the other parts have to be connected
with the ground.
Do not remove the top case when the power cord is con-
nected to the wall plug.
Do not switch on when the top case is removed.
When dismantling the product, it is absolutely necessary to
test it before plugging it.
TEST OF GROUND ( < 0,1 Ohm )
TEST OF HIGH TENSION ( 1250 V / 2 sec )
BE CAREFUL !
When cleaning the filter, please disconnect
the device of the main line. Replace it be-
fore use.
TECHNICAL
FEATURES
Page 3 / 9