Hiyasu ASE 18UB Manuel D'instructions page 74

06Manual 2Hiyasu Eng 7/4/06
Comfortable SLEEP
Before going to bed at night, you can simply press the SLEEP button and unit will
bring you a sound sleep in selected mode.
In COOL mode
One hour after SLEEP mode starts, temp. will become 1oC higher than temp. set-
ting. After running for another 1 hour, temp. rises by 1ºC further. Unit will run for 6
hours then stops automatically. Temp. is higher than temp.
setting so that room temp. won't be too Iow for your sleep.(As shown in Fig.l)
In HEAT mode
One hour after SLEEP mode starts, temp. will become 2oC lower than temp. set-
ting. After running for another 1 hour, temp. decreases by 2ºC further. Unit will run
for 3 hours at this temp. then increases another 1oC and stops
automatically 3 hours later. Temp. is lower than temp. setting so that room temp.
won't be too high for your sleep.
(As shown in Fig .2)
Power Failure Resume Function
with the indicator lighting up. If the unit is started for the first time, the compressor
will not start running unless 3 minutes have elapsed. When the power resumes
after power failure, the unit will run automatically, the power indicator lights up, and
3 minutes later the compressor starts runningrs with the indicator lighting up.
Note: In AUTO mode, unit will run in SLEEP function according to operation
mode. In FAN mode, comfortable sleep is not available.
SLEEP operation starts
1 hr
1 hr
Temp. setting
72
All manuals and user guides at all-guides.com
09:22 Página 72
OPERATION
SLEEP operation stops
Approx. 6 hrs
Rises 1ºC
Rises 1ºC
Unit stop
Fig. 1
Temp. setting
1 h
decreases 2ºC
decreases 2ºC
1 h
3 h
SLEEP mode starts
Fig. 2
Unit stop
Approx. 3 hrs
Rises 1ºC
SLEEP mode stops