JSP FAR0810 Instructions Pour L'utilisation, L'entretien Et L'inspection page 3

DESCRIPTION
The Fall Arrestor system is classed as a Personal Protective Equipment (PPE) by the
European PPE Regulation (EU) 2016/425 and PPE Regulation (EU) 2016/425 as brought
into UK law and amended and have been shown to comply with this regulation through
the Harmonized Standards / Designated European Standards:
EN 353-2:2002
(Guided type fall arresters including a flexible anchor line).
Certification Body (CE):
SATRA Technology Europe Ltd, Bracetown Business Park, Clonee, Dublin D15 YN2P
Ireland (Notified Body 2777)
Ongoing Assessment Body (CE):
SGS Fimko Oy, Takomotie 8, FI-00380 Helsinki, Finland (Notified Body 0598)
Certification Body (UKCA):
SATRA Technology Centre, Wyndham Way, Telford Way, Kettering, Northamptonshire,
NN16 8SD, UK (Approved Body 0321)
Ongoing Assessment Body (UKCA):
SGS United Kingdom Ltd., Unit 202B, Worle Parkway, Weston-super-
Mare, BS22 6WA, UNITED KINGDOM (Approved Body 0120)
Each fall arrest system is issued with a declaration of conformity & record card, these should be kept safe for future reference.
APPLICATION AND LIMITATIONS
APPLICATIONS
1
3m
4
Clearance to the ground 3 m [1], vertical use only[2], careful with the angle/egdes [3], check your anchor[4],
visual inspection to check the direction [5].
2
3
5
4
The fall arrester system, is a guided type fall arrester on a flexible anchorage line made of a Kernmantle rope of
diameter 12mm. No part of the product / system should be substituted. It accompanies the user without requiring manual
adjustment during upward or downward movement, and locks automatically on the anchorage line when a fall occurs.
Follow Step 1 to Step 4 to use the fall arrester:
1. Connect the upper end of the anchorage line with the help of the connector to the anchorage point. Ensure that the
anchor device is strong enough & has a minimum strength of 12kN for metal & 18kN for textile.
2. Now connect the connector of the rope grab to the attachment element of your Full Body Harness. Fall arrest
attachment points are marked with the letter "A", they can be D-ring or 2 loops (in this case both marked A/2).
Ensure that the connector is locked tight.
A
We recommend the user to use preferably the front anchorage point of the harness.
3: The user is now free to move up and down while pressing the rope grab grip.
4: Ensure that when you are working, the rope grab grip is released to its normal position.
The anchorage line must be hanging vertically from a reliable anchorage point.
A
5