Blue Clean AR 142 S Instructions De Montage, D'entretien Et D'utilisation page 8

PREPARATION ASSEMBLY INSTRUCTIONS
7
F
F
Locking Spray Gun (before Lance installation)
To lock trigger of spray gun (F), point gun away from you
and press bottom half of lock button to engage lock.
Squeeze or pull trigger to make sure it is locked.
ALWAYS leave lock button in locked position when not
in use. This ensures the gun is in "safe" mode until it is
ready for use. To unlock, press top half of lock button to
release.
Note: The trigger lock prevents trigger from being ac-
cidentally engaged.
8
Unlock
Lock
Extension Lance installation
With spray gun (F) in locked position, attach extension
lance (J) directly to spray gun. Insert lance extension
into gun, pushing together and turning clockwise
simultaneously. Turn the extension collar clockwise
to lock into place. To remove extension lance (J), turn
extension collar counterclockwise to unlock, then push
together and turn counterclockwise to release.
Note: The extension lance must be inserted in gun
before using any of the other attachments, and
in place for storage. It is recommended that once
extension is connected to leave it in place.
8
J
F