Product Description - GCE MEDIUNIT AFNOR Notice D'instructions

5. PRODUCT DESCRIPTION

5.1. PRODUCT DESCRIPTION
TU is a medical device to allow an operator to connect or disconnect the
supply of the required medical gas for anaesthetic devices, breathing ven-
tilators and other medical devices.
EN
A
N
A GAS SPECIFIC PLUG
Plugs are part of the button designed in colours specifi ed to the gas for
which TU is designed for.
B SLEEVE
Basic external part of the complete TU with gas marking. Available in op-
tion with a lid (B2).
C COVER RECESSED OR EXPOSED
Recessed cover or exposed cover are basic external part of the complete
TU.
D QUICK COUPLER QC
Quick coupler is used to connect the medical devices into the TU. Quick
coupler allows only the gas specifi ed device for which also the TU is de-
signed for. Quick coupler can be only connected into the housing which is
designed for the same type of gas.
E SCREWS M5X12
TU includes 3 pcs of screws M5x12 to be used for fi xing the housing in the
installation box.
F CHECK VALVE OF TU
Included in every TU is a check valve that automatically closes the housing
if quick coupler is not connected.
G HOUSING WITH AXIAL OR RADIAL INLET
Housing is an in-built part of installation with two general variants:
• Housing with radial inlet connection
• Housing with axial inlet connection
B2
C1
C2
B1
F G
D
E
G
4/84
J
I
H
I