Festo CPX-CMXX Mode D'emploi page 22

3.3 Setting the RUN/STOP rotary switch
Please note
Leave the RUN/STOP rotary switch at position 0"
(STOP) during installation.
Setting
0 = STOP
The CPX−CMXX is stopped when the RUN/STOP
rotary switch is switched from 1
The Stop LED lights up yellow.
1 F = RUN
CPX−CMXX started. The RUN LED lights up
green. The switch positions 1
further function.
Modifications to the position of the RUN/STOP rotary switch are trans
mitted to the controller with a delay of 500 ms.
22
F to 0.
F have no
Festo P.BE−K−CPX−CMXX 0810a English
Rotary switch