Collective Operation Settings - Mitsubishi Electric PAC-SC30GRA Manuel D'utilisation

4-2. Collective operation settings

(1) With the cover closed:
CENTRALLY CONTROLLED
CHECK
ADDRESS ON OFF
˚C
COLLECTIVE
GROUP
NOT AVAILABLE
(1) With the cover closed:
1 The start and stop functions of the air conditioners for all groups can be controlled using the
collective ON/OFF switch. (This collective ON/OFF function can be operated when the UPPER
PANEL is open as well.)
(2) With the cover open:
1 Call the COLLECTIVE OPERATION SETTING SCREEN using the GROUP select switch (the
screen in which all indicators are blinking).
G 1 G 2
G 5 G 6
2 Controlling the items that you want to adjust
• Press the switch that you want to adjust (OPERATION MODE, TEMPERATURE SETTING,
FAN SPEED, AIR DIRECTION SETTING, HORIZONTAL BLOW, VENTILATION SETTING and
EXTERNAL TIMER SETTINGS).
(For detailed explanations on how to adjust each feature, refer to 4-3.)
• Indicators will stop blinking but will remain lit as the settings are entered for all groups.
• If you do not want to adjust a particular setting for all groups, leave it as is (so that it continues
to blink). The previous setting that was used will continue to be enabled.
ON/OFF
˚C
GROUP 1
FILTER
CHECK MODE
TEST RUN
G 3 G 4
COLLECTIVE OPERATION
SETTING SCREEN
G 7 G 8
"Group" is abbreviated as "G".
(2) With the cover open:
CENTRALLY CONTROLLED
CHECK ADDRESS ON OFF
˚C
COLLECTIVE
GROUP
TEMP. ON/OFF
GROUP
REMOTE CONTROLLER
PAC-SC30GRA
[COLLECTIVE OPERATION SETTING SCREEN]
CENTRALLY CONTROLLED
CHECK
ADDRESS
˚C
COLLECTIVE
GROUP
ON/OFF
˚C
GROUP
FILTER
CHECK MODE
TEST RUN
NOT AVAILABLE
FILTER
CHECK
GROUP
TEST RUN
˚C
ON OFF
GROUP
CHECK MODE
TEST RUN
NOT AVAILABLE
2
1
FILTER
9