Sena R1 EVO Mode D'emploi page 56

11. TROUBLESHOOTING
11.1 Fault Reset
When the Bluetooth system is not working properly, you can easily reset
the unit:
1. Locate the pinhole reset button below Sena logo at the back side of
the helmet.
2. Gently insert a paper clip into the hole and press and Fault Reset
Button for 1 second with light pressure.
=
FAULT
RESET
11.2 Factory Reset
To erase all of your settings and start fresh, the system can be restored
to factory default settings using the factory reset.
=
=
=
HOLD
10s
TAP
2x
TAP
1x
R1 EVO Smart Cycling Helmet | 26