Sena R1 EVO Mode D'emploi page 50

6 MESH INTERCOM
2. Navigate between the channel.
(1 2 •••
=
3. Save the channel.
=
"Channel is set,
channel #"
4. To exit the Channel Setting, tap the (+) Button or the (-) Button until
you hear a voice prompt, "Exit", and tap the Center Button.
Note:
• Channel Setting always starts with channel 1.
• If you do not press any button within for approximately 10 seconds
in a specific channel, the channel will be automatically saved.
• The channel will be remembered even if you turn off the R1 EVO.
8 9 Exit
TAP
or
1x
"#"
TAP
1x
1 •••)
=
R1 EVO Smart Cycling Helmet | 20
TAP
1x