Sena R1 EVO Mode D'emploi page 45

3. PAIRING THE BLUETOOTH SYSTEM
WITH OTHER BLUETOOTH DEVICES
The pairing operation is required only once for each Bluetooth device.
3.1 Phone Pairing
1. Press and hold the (+) Button and Center Button for 10 seconds
when the R1 EVO is turned off.
=
2. With your mobile phone in Bluetooth-pairing mode, select Sena R1
EVO in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
HOLD
10s
R1 EVO Smart Cycling Helmet | 15