Sena R1 EVO Mode D'emploi page 55

10 CONFIGURATION SETTING
10.2 Software Configuration Setting
You can change the settings of the headset through the Sena Device
Manager or the Sena Cycling App.
10.2.1 Channel Setting (Default: channel 1)
If the Mesh Intercom communication experiences interference because
other groups are also using the channel 1, change the channel. You can
select one of 1 to 9 channels.
10.2.2 Voice Prompts (Default: Enable)
You can disable voice prompts by software configuration settings, but
the following voice prompts are always on.
- Bluetooth system configuration settings menu, battery level indicator
10.2.3 Voice Command (Default: Enabled)
When Voice Command is enabled, you can use your voice to give a
command the Bluetooth system operate certain operations completely
handsfree. If Voice Command is disabled, you will need to operate all
of the functions using the buttons on the Bluetooth system.
10.2.4 Sidetone (Default: Disable)
Sidetone is audible feedback of your own voice. It helps you to naturally
speak at the correct level according to varying helmet noise conditions.
If this feature is enabled, you can hear what you are speaking during an
intercom conversation or a phone call.
10.2.5 Advanced Noise Control™ (Always on)
The background noise is reduced during an intercom conversation.
R1 EVO Smart Cycling Helmet | 25