WMF KÜCHENminis Vario Mode D'emploi page 13

rough guide, there should be one teaspoon of loose tea for each 250 ml of water.
Place the tea strainer (4) in the kettle by pointing the Cromargan® label and the handle in the
direction of the pour spout (Fig. A).
Leave the tea to infuse for the appropriate amount of time depending on the type of tea. Remove
the tea strainer using the handle. Caution: The rising steam can cause burns and the tea strainer may
become hot.
Making tea with teabags
As well as making tea using loose leaves, you can also use regular teabags.
Follow steps 1 to 7 described above (see the chapter entitled "Boiling water") to heat the water up to
the desired temperature. Ensure that the tea strainer included (4) has been removed from the kettle.
In the inside section of the lid, there is a holder which the teabag can be hooked onto (Fig. C).
Leave the tea to infuse for the appropriate amount of time depending on the type of tea.
Types of tea
The temperature of the water and the length of time you leave the tea to infuse plays a key role in
making tea. Below you will find an overview to act as a guide: The temperature and infusion time can
be adapted depending on the type of tea and your personal preferences.
Temperature Type of tea
60°C Japanese green tea
White tea
70°C
Yellow tea
Green tea
80°C
Oolong tea
Black tea
90-100°C
Herbal tea, fruit tea
Boil function
The kettle is equipped with a boil function. To activate it, press the appropriate temperature button
twice when choosing the desired temperature (60°, 70°, 80° or 90°C). The temperature button selected
and the 100°C button light up.
Press the Start/Stop button
The Start/Stop button
Once the water has boiled, the 100°C button light goes out and the cooling process starts
automatically. The Start/Stop button
When the target temperature is reached, the appliance beeps (several times at certain intervals) and
the button lighting goes out.
Note: Please note that it takes several minutes for the water to cool down from 100°C to 60°C or 70°C.
to start boiling.
and the LED ring (7) inside the kettle also lights up.
flashes.
Infusion time
3-4 mins.
3-4 mins.
1-3 mins.
3-4 mins.
1-2 mins.
3-4 mins.
5-8 mins.
13