Operation; Answering A Call; Electric Lock Activation; Settings Menu - Urmet NEXO2 1708/2 Mode D'emploi

10 Power ground
9 Door opener control
}
Y2
Auxiliary button terminals
Y1
}
X1
Auxiliary button terminals
X2
If the video door phone is installed at the end of a line, the jumper must be in 75 Ohm
Jumper
position, otherwise it must be in the ∞ position (default).

OPERATION

ANSWERING A CALL

After a call from a video door phone door unit, the video door phone will ring and the visitor's image will
appear. Press to activate the communication. The LED under the button
the conversation is in progress.
Press the button
Audio can only be activated with the display on.

ELECTRIC LOCK ACTIVATION

The electric lock connected to the door unit can be activated at any time by pressing the specifi c button
.

SETTINGS MENU

The following settings can be adjusted by using the settings menu button
• speaker volume during audio function (5 levels);
• speaker volume during call function (5 levels);
• image brightness (31 levels);
• image colour (31 levels).
10
again to end playback.
(use a relay box to actuate electric loads).
(use a relay box to actuate electric loads).
will blink to indicate that
:
DS1708-004