Cleaning And Maintenance - cecotec ForceTitanium 650 Manuel D'instructions

How to use the steam burst: :
The steam burst feature provides additional steam to remove stubborn wrinkles. It may be
used both with steam or dry ironing. Press the power steam button to release a steam burst
that can penetrate the fabric. Pressing the button several times may be necessary to build
up the steam burst. Wait a few seconds for the steam to penetrate the fabric before pressing
the button again for more steam. You can also use the steam burst to iron textiles vertically
(curtains, hung clothes, etc.).
Note: for optimal results, do not apply more than three successive bursts after the
indicator light turns off.
After use:
1. Turn off and unplug the iron.
2. Empty the iron immediately after use. Do not store the iron with water in its tank.
3. Wait until the iron has cooled down before storing it. Let it rest on its base in vertical position
to protect the soleplate from scratches, corrosion, or stains.

5. CLEANING AND MAINTENANCE

Outside surface of the iron:
After unplugging and letting the iron cool down, wipe its exterior surface with a damp cloth
and, if necessary, a mild detergent.
WARNING: do not use any abrasive cleaning agent.
Soleplate:
Starch and other types of residue may be easily removed from the soleplate with a damp cloth.
To avoid scratches on its finish, do not use metallic scouring pads to clean the soleplate and
never place the iron on a rough surface. If synthetic fabrics are ironed at high temperature, both
the fabric and the soleplate of the iron could be damaged. The best way to remove synthetic
residue from the soleplate is to heat it up and iron over an old cotton rag.
CAUTION: do not use steam iron cleaners in this iron, since they could damage its working
parts.
Self-Cleaning:
IMPORTANT: your iron will give the best ironing results and last longer if you use the self-
cleaning function once a month, or more depending upon usage.
05106_ForceTitanium 650_Manual_DS.indd 21
ENGLISH
FORCETITANIUM 650 21
21/12/18 8:54