Before Use - cecotec ForceTitanium 650 Manuel D'instructions

use only water with low mineral content.
• Burns can occur when touching hot metal parts, hot water,
or steam. Hot water may leak from the iron. Be careful when
filling or turning the steam iron upside down.
• To protect against burns or injuries, do not direct steam
toward persons or animals when ironing.
• The iron must be used and placed on a stable surface. When
placing the iron on its stand, make sure that the surface is
stable.
• Keeping the iron at maximum temperature for too long may
cause discolouration, which will not affect the performance
of the appliance.
• Do not try to repair the appliance by yourself. Contac the
official Technical Support Service of Cecotec for advice.
• Cleaning and maintenance must be carried out according to
this instruction manual to make sure the appliance functions
properly. Turn off and unplug the appliance before moving
and cleaning it. Make sure the iron has completely cooled
down before storing it.
• Cleaning and maintenance tasks must not be carried out by
children.
• Store the appliance and its instruction manual in a safe and
dry place when not in use.
• The manufacturer takes no responsibility for any damage
caused by misuse of the appliance. Any misuse or non-
compliance with these instructions renders the warranty
and the manufacturer's liability null and void.

3. BEFORE USE

· Remove all packaging elements.
· Inspect all parts of the appliance for visual damage. Unwind the power cord completely and
inspect it for damage. Do not use the appliance if it or its cord have been damaged or are not
working properly. In case of damage, contact the official Technical Support Service of Cecotec
05106_ForceTitanium 650_Manual_DS.indd 17
ENGLISH
FORCETITANIUM 650 17
21/12/18 8:54