Before Use - cecotec GoForce 8000 Folding Titanium Manuel D'instructions

Close supervision is necessary when
the appliance is being used by or near
children.

3. BEFORE USE

Note: some parts of the steam iron have been slightly greased and as a result,
the iron may slightly smoke when switched on for the first time. After a short
time, this will cease.
1. Take the product out of the box.
2. Remove any packaging materials, stickers or protective foil from the
soleplate.
3. Clean the soleplate with a soft cloth.
4. OPERATION
WATER TANK FILLING
1. Unplug the iron before filling the water tank.
2. Turn the temperature knob to de minimum position.
3. Remove the handle rubber lid and add water through the water-filling
opening.
DRY IRONING
1. Set the steam knob at the no-steam position (
2. Select the appropriate temperature according to each clothes' label.
STEAM IRONING
1. With the unit unplugged, fill the iron with water.
2. Connect the iron to the power supply and use the knob to select the
adequate voltage.
3. Set the temperature knob to the desired temperature and wait until the
indicator light turns off, indicating that the iron is ready for use.
4. Turn the steam knob to the steam position (
5. When finished, turn the temperature knob anticlockwise to the minimum
position and unplug the appliance from the power supply.
WARNING:
• If the iron is operated before de indicator light turns off, the iron will
not have reached the correct temperature to vaporize and the soleplate
could leak.
• Synthetic fabric, nylon, synthetic silk and silk are not suitable to be
).
).
GOFORCE 8000 FOLDING TITANIUM
ENGLISH
15