Cleaning And Maintenance; Technical Specifications - cecotec Total Iron 7000 SteamPro Manuel D'instructions

ESPAÑOL
indicators will turn off too. Allow the whole unit to cool completely down before holding or
storing it.
Setting
1
2
3
Maximum

5. CLEANING AND MAINTENANCE

Turn off, unplug the appliance from the power supply, empty the water tank (do it after each
use) and allow it to cool down completely.
Use a damp, soft cloth to clean the appliance's surface.
If there is any fabric adhered to the soleplate, use a damp cloth with vinegar to wipe off the
soleplate.
Do not use abrasive scouring pads, powders or cleaners to clean the product.
If scale blocks the steam holes, use a toothpick to remove it.
If the appliance is not going to be used for a long time, pour out the water in the tank and store
the iron on the thermal insulating cushion.
When not in use, the steam supply hose and power cord must be folded well and stored in their
storage compartment.

6. TECHNICAL SPECIFICATIONS

05500 Total Iron 7000 Steam Pro
2000-2400 W, 220-240 V~, 50-60 Hz, IXPO
05503 Total Iron 7200 Titan
2260-2700 W, 220-240 V~, 50-60 Hz, IXPO
05504 Total Iron 7500 TurboSlim
2260-2700 W, 220-240 V~, 50-60 Hz, IXPO
22
TOTAL IRON 7000 STEAMPRO / STEAMPRO TOTAL IRON 7200 TITAN / TOTAL IRON 7500 TURBOSLIM
05500_05503_05504_Total Iron 7000_7200_7500_Manual_YV01191106.indd 22
Temperature
70 ºC-120 ºC
100 ºC-160 ºC
140 ºC-210 ºC
170 ºC-225 ºC
Fabric
Acetate, elastane, polyamide,
polypropylene
Cupro, polyester, silk
Triacetate, viscose, wool
Cotton, flax
6/11/19 17:06