cecotec Total Iron 7000 SteamPro Manuel D'instructions page 17

ENGLISH
filling or turning the steam iron upside down.
To protect against burns or injuries, do not direct steam
toward persons or animals when ironing.
The iron must be used and placed on a stable surface. When
placing the iron on its stand, make sure that the surface is
stable.
Keeping the iron at maximum temperature for too long may
cause discolouration, which will not affect the performance of
the appliance.
Do not try to repair the appliance by yourself. Contac the
official Technical Support Service of Cecotec for advice.
Cleaning and maintenance must be carried out according to
this instruction manual to make sure the appliance functions
properly. Turn off and unplug the appliance before moving and
cleaning it. Make sure the iron has completely cooled down
before storing it.
Cleaning and maintenance tasks must not be carried out by
children.
Store the appliance and its instruction manual in a safe and
dry place when not in use.
Cecotec takes no responsibility for any damage caused by
misuse of the appliance. Any misuse or non- compliance with
these instructions renders the warranty and Cecotec's liability
null and void.
If the power cord is damaged, it must be replaced by the
Technical Support Service of Cecotec.
Warning: All our ironing range's products have undergone
quality control tests previous to their commercialization. These
tests consist of filling the water tank in order to check tightness
and to ensure correct operating of the device. Once the test has
been carried out, the tank is emptied and dried, but there is a
slight probability that water could remain inside it.
17
TOTAL IRON 7000 STEAMPRO / STEAMPRO TOTAL IRON 7200 TITAN / TOTAL IRON 7500 TURBOSLIM
05500_05503_05504_Total Iron 7000_7200_7500_Manual_YV01191106.indd 17 6/11/19 17:06