Anti-Drip Function; Cleaning And Maintenance - cecotec 3D ForceAnodized 850 i-Pump Manuel D'instructions

or vertically 8 minutes. The device will produce 6 beeps and the LED light will light up in red,
indicating that the appliance has been turned off.
To heat up the iron again, lift or gently move the iron.

ANTI-DRIP FUNCTION

• This function automatically prevents water from spilling when the appliance is not hot
enough.
• During use, the anti-drip system may emit a loud clicking sound, especially during
preheating or whilst cooling down. This is perfectly normal and indicates that the system
is functioning correctly.
BUILT-IN ANTISCALE SYSTEM
• This system is designed to reduce the building up of limescale due to steam ironing. This
will lengthen the iron's shelf life.
CAUTION:
Label indications

5. CLEANING AND MAINTENANCE

• Turn off, unplug the appliance from the power supply, empty the water tank (do it after
each use) and allow it to cool down completely.
• If there is any fabric adhered to the soleplate, use a damp cloth with vinegar to wipe off
the soleplate.
• Do not use abrasive scouring pads, powders or cleaners to clean the product.
• If scale blocks the steam holes, use a toothpick to remove it.
• To protect the soleplate while it is stored, place the steam iron in an upright position on
its heel rest.
On the label means that this article may not be ironed.
Type of fabric
Nylon/synthetics
Wool/silk
Cotton
Linen
Temperature knob
MIN.
MAX.
3D FORCEANODIZED 850 I-PUMP
ENGLISH
15