Comfort Mode - EQUATION HPA02-20 Mode D'emploi

• ON / OFF: Press the switch button on the right side to turn the appliance.
• LIGHT: The red light between the two knobs lights up when the device is
heating.
• MODE SELECTION KNOB: Please note the temperature can only be adjusted
under COMFORT MODE.
• COMFORT MODE: Under Comfort Mode, you can set your desired
temperature from 10°C to 35°C with the Temperature Setting Knob. There are
9 graduations on the Temperature Setting Knob from 1 to 9 which define the
temperature from 10°C to 35°C ( at "1", the temperature will be maintained
at around 10°C while at "9", the temperature will be maintained at around
35°C ). The product has a built-in thermostat, when ambient temperature is
below the set temperature, the heater will operate and the red indicator light
will illuminate. When the ambient temperature is above the set Temperature,
the heater will stop operating temporarily and the red indicator light will be
switched off.
ECO MODE: Under ECO Mode, you can set your desired temperature from
•
7°C to 32°C with the Temperature Setting Knob. There are 9 graduations on
the Temperature Setting Knob from 1 to 9 which define the temperature from
7°C to 32°C ( at "1", the temperature will be maintained at around 7°C while
at "9", the temperature will be maintained at around 32°C ). The product has a
built-in thermostat, when ambient temperature is below the set temperature,
the heater will operate and the red indicator light will illuminate. When
the ambient temperature is above the set Temperature, the heater will stop
operating temporarily and the red indicator light will be switched off.
NO-FROST: Under this mode, the heater will maintain a steady
•
temperature of 7°C. The product has a built-in thermostat, when ambient
temperature is below 7°C, the heater will operate and the red indicator light
will illuminate. When the ambient temperature is above 7°C., the heater will
stop operating temporarily and the red indicator light will be switched off. This
is to prevent frost formation in the room at lowest energy consumption.
• STAND-BY: When the room temperature has reached the desired
temperature and you want to stop the heater temporarily and choose a
different operation later, you can switch the heater to the STANDY-BY mode
during which the heater will stop working
25
3. HOW TO USE