Cleaning And Maintenance - Nuna ZAAZ Mode D'emploi

Dismantling the Seat from the Leg Frame
Once the seat is attached to the legs of the chair, it is
considered to be a permanent assembly. However, it is
possible to reverse this assembly if the seat needs to be put
into storage or shipped. We recommend this should not be a
regular occurrence.
1
- Slide down the lock behind the flap and lift the flap
completely.The seat automatically rises up to the
highest position. (2)
2
- Gently pull forward the two clips on each side, as
illustrated. (22)
3
- Slide the seat up and remove from the legs. If the flap is
not completely up, you will not be able to slide the seat
upwards.
13 ZAAZ instructions

Cleaning and maintenance

You can clean the high chair and accessories with a damp
cloth or a neutral detergent, but do not use abrasive
detergents or solvents which could damage the material.
The anodised aluminium legs are maintenance free but will
be damaged by impact or scratching.
Continued and extended exposure to sunlight can change
the colour of many materials.
Inspect your high chair regularly in order to detect any
damage.
NUNA International B.V.
Nuna and all associated logos are trademarks.
ZAAZ instructions 14