Calendar/Clock Settings - JVC KW-Z1000W Guide De Démarrage Rapide

Basic Operations
4
Touch [System].
h System setting menu appears. h
5
Touch [Security Code Set] in the system
setting menu.
h Security Code Set screen appears. h
6
Enter a security code with 4 to 8 digits
and touch [Enter].
7
Enter the same code again and touch [Enter].
Now, your security code is registered.
NOTE
• Touch [BS] to delete the last entry.
• If you enter a different security code, the
procedure returns to step 6 (for first code entry).
• If you have disconnected the Receiver from the battery,
enter the correct security code as that you have entered
in step 6 and touch [Enter]. You can use your receiver.
To change the security code:
1
Touch [Security Code Change] on the
Security screen.
h Security Code Set screen appears. h
2
Enter the current registered security code
and touch [Enter].
3
Enter a new security code with 4 to 8
digit number and touch [Enter].
4
Enter the same code again and touch [Enter].
The new security code is registered.
8
To clear the security code:
1
Touch [Security Code Cancellation] on
the Security screen.
h Security Code Set screen appears.
h
2
Enter the current registered security code
and touch [Enter].
The security code is cleared.

Calendar/clock settings

1
Press the [ ]/[ ] button.
2
Touch [
].
3
Touch [SETUP].
h SETUP Menu screen appears.
h
4
Touch [System].
h System setting menu appears. h
5
Set each item as follows.
Scroll the page to show hidden items.
[Time Format]
■
Select the time display format.
[12-Hour] (Default)/[24-Hour]
■ [Clock]
[GPS-SYNC] (Default): Synchronizes the clock
time with the GPS.
[Manual]: Set the clock manually.
[Time Zone]
■
Select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.9)
NOTE
• Please set the date and time. If they are not set,
some functions may not work.