Controlling Audio; Controlling General Audio; Equalizer Control - JVC KW-Z1000W Guide De Démarrage Rapide

Controlling Audio

You can adjust various settings such as audio
balance or subwoofer level.
1
Press the [ ]/[ ] button.
2
Touch [
].
3
Touch [Audio].
Ñ

Controlling General Audio

1
Touch [FAD / BAL / Zone].
2
Set each parameter as follows.
[C] and [D] adjust the left and right volume
balance.
[R] and [S] adjust the front and rear volume
balance.
■ [Center]
Clear the adjustment.
Ñ

Equalizer Control

You can adjust equalizer by selecting the
optimized setting for each category.
1
Touch [EQ / SW Level].
2
Touch the screen and set the Graphic
Equalizer as desired.
Gain level (area in dotted frame)
■
Adjust the gain level by touching each
frequency bar.
You can select a frequency bar and adjust its
level by [R], [S].
[ALL SRC]
■
Apply the adjusted equalizer curve to all
sources. Touch [ALL SRC] and then touch
[OK] on the confirmation screen.
■ [Memory]
Saves the adjusted equalizer curve as "User1"
to "User4".
■ [Initialize]
Initialize (flatten) the current EQ curve.
[Bass EXT] (Bass Extend Settings)
■
When turned on, the frequencies lower than
62.5 Hz is set to the same gain level (62.5 Hz).
[SW Level]
■
Adjust the subwoofer volume. This setting
is not available when Subwoofer is set to
"None".
[Pop]/[Hip Hop]/[R&B]/[Jazz]/[Classical]/
■
[Hard Rock]/[Flat]/[Bass Boost]/[User1]/
[User2]/[User3]/[User4]
Recall the preset EQ curve.
Controlling Audio
21
English