Button Definition; Normal Operation - AVP BAFANG DP C10.UART Manuel

BUTTON DEFINITION

NORMAL OPERATION

• ON/OFF Switch
Turn on the device, press and hold
display. Press and hold
the bike is not used, after 5 minutes (time can be set) the display
will be automatically turned off.
30
for 2s to power on the
again for 2s to power off the display, If
• Assist Mode Selection
In the manual gearshift mode, press the
desired level of support by the motor. The lowest level is Level
1, the ighest Level 5. When the display is on, the default mode
is Level 1. When there is no numeric mode display, there is no
power assistance.
(power assistance lever selection interface as below figure)
or choose the
DISPLAY MANUAL DP C10.UART