Introduction - AVP BAFANG DP C10.UART Manuel

INTRODUCTION

• Name: Intelligent display HMI
• Model: DP C10.UART
• Scope: EN15194 electrical bicycle
• Appearance: the shell is made of PC; The liquid
crystal display is made of hardened PMMA.
• Numbering on the back of HMI
Number on the middle of display back, number is divided into
up row and down row (as shown in the figure):
A. First line as below
DP C10.U 1.0
1. DP C10.U : BAFANG Display model
2. 1.0: Hardware version number
26
B. Second line as below
602F8Q7280001
1. 602: Wire length and connector model
850 M5.2, keypad250
2. F8: test device number
3. Q7280001:production date is July 28th ,2016,
serial number is 0001.
Please refer to <Instrument labelling rules> for other detailed
description, the document number is BF-TS-753-C0-02II.
• Display HMI P type wire label number rule
Number on the middle of P type label, number is divided into
up row and down row and QR code is at right side (as shown in
the below figure).
The first line:
DPC10F80201.1- Software version
The second line:
PD2526051205 - Parameter code
Content of QR code:
DPC10F80201.1
PD2526051205
DP C10.U 1.0
602F8Q7280001
DISPLAY MANUAL DP C10.UART