Specifications; Functional Overview - AVP BAFANG DP C10.UART Manuel

SPECIFICATIONS

• 36V/43V/48V DC power supply
• Rated current is 10mA
• Maximum operating current is 30mA
• Power-off leakage current is less than 1uA
• Operating current supplied to controller is 50mA

FUNCTIONAL OVERVIEW

• Use of a two-way serial communication protocol, simple
operation of the display via the external 5-key keypad.
• Speed display: displaying the real-time speed as SPEED, the
maximum speed as MAXS and the average speed as AVG.
• Km or mile: The user can choose between km and mile.
• Intelligent battery level indication: With an optimization
algorithm, a stable display of the battery level is ensured, and
the problem of fluctuant battery level indication common with
other displays is avoided.
• Automatic light-sensitive lights: The headlight, taillight and
display backlight will be automatically turned on/ off depending
on lighting conditions.
• 5 levels off display backlighting: Different levels, leave 1 is
most dark, level 5 is highest light.
• 6-Level-Support: setting power Levels 0 to 5.
• Trip distance indication: The maximum distance displayed is
99999. Single-trip distances TRIP or the total distance TOTAL
can be displayed.
28
• Operation temperature: -20°C~45°C
• Storage temperature: -30°C~70°C
• IP level: IP65
• Storage humidity: 30%-70%
• Intelligent display: including motor output power W for riding,
Remaining miles TO GO, consumption of energy (calories) C.
• Display of error messages
• Walk assistance
• Settings: Various parameters, e.g. mode, wheel diameter,
speed limit etc., can be set on the computer via a
communication cable. See the setting.
• Maintenance warning (this function can be deactivated):
Maintenance warning information is- dis played based
on battery charge cycles and riding distance. The display
automatically estimates the battery life and gives warnings
when the number of charge cycles exceeds the set value. A
warning will also be displayed when the accumulated total riding
distance exceeds the set value.
• The maximum charging value is 5V&500mA through USB port.