Parameter Settings - Jaga BRIZA 22-JFCC Manuel

Parameter settings

– switch the thermostat off with the "
– To go to the menu, press the "M" and "+" buttons simultaneously for 10 sec. until " " appears. Adjust
the settings with the "+" or "-" buttons.
– scroll through the menu with the "M" button.
MENU DESCRIPTION
01
Temp. Offset
04
Maximum temperature
05 Minimum temperature
06 Display mode
07
Frost protection
11
Dead Band
12
Display mode
13
2-pipes/4-pipes select
14 (0-10V) select dead band or not
15
Reboot memory
16
Mode
17
Fanspeed
18
Maximum fan speed
19 Medium fan speed
20
Low fan speed
21 Factory reset
10DA Software version
48
" button
ADJUSTABLE
-8°C .. +8°C (+0,5°C)
+10 °C .. +40°C (+0,5°C)
+10 °C .. +40°C (+0,5°C)
Room / Set / Room set
+10 °C .. +20°C (+0,5°C)
0°C .. +3°C (+0,5°C)
Room / floor / Room vloer
'2': 2-pipe connection / '4': 4-pipe connection
'0': With dead band / '1': Without dead band
'OF': do not save / 'LA': save
Heating / Cooling / Heating + Cooling / Auto select ( 4-pipe only )
80% - 90% - 100% / Auto mode
80% .. 100%
45% .. 75%
20% .. 40%
rE
After selecting "rE", press the "" button to go to the startup window.
Recovery was successful.
10dA - Version 21
JAGA NV | BRIZA 22 - JFCC | MANUEL | 23.08.2021 | V.07