Publicité
Les langues disponibles
Les langues disponibles
Remote sensor connection
Illustration 1) - 3)
Within the side walls of the fixing channel, knock-outs are provided through which to feed electrical leads or capil-
lary tubes from the remote sensor (mid. ID-17 mm). Protection sleeves should be used.
1)
Height marking of screed
The marking line corresponds with the final top edge of the screed (for a screed thickness of 65 mm). The marking
of the height enables the bracket to be adjusted inside the fixing channel in such way, that it will have the suitable
height throughout the floor construction.
Subject to technical modification without notice.
102265380
06/2012
8
2)
For an overview of our global presence visit
www.oventrop.com.
3)
Publicité
