Publicité
Les langues disponibles
Les langues disponibles
D. Further functions of the fixing channel
Height adjustment of the pipe connection
Illustration 1) - 3)
Through openings in the cover of the fixing channel, it is possible to adapt the pipe connections to different levels.
If required, the opening can be enlarged by simply bending the infill pieces at the rated break point in the cover,
this can be done by hand.
1)
2)
3)
Circuit connection through reverse side
Illustration 1) - 2)
The "Unibox" can be connected to the circuit through the reverse side of the fixing channel from an adjoining
room. Any infill pieces in the rear of the fixing channel can be removed with a screwdriver.
Note: In most drawings the flow connection pieces are displayed without their insulation for clarity.
1)
2)
7
Publicité
