ingenuity InLighten Soothing Swing - Twinkle Tails Manuel D'utilisation page 30

ENGLISH
Using the Swing Control Module
Mobile Motion
Lights
Swing Timer Select
Button and Indicator
Nature Sounds/
Speed Selector Button Music
and Indicator
Volume Control
Power Switch
Slide the Power switch to power the Swing Control Module.
The Speed Selector function provides 6 speed settings and OFF.
The LEDs operate sequentially and in bar graph mode. To start
the swing function, press the button until the flashing LED bar
graph displays the desired setting. Then gently push the seat
(within 15 seconds) to activate the swing motion. After five
seconds a single LED will indicate the selected speed.
When you change the speed setting during swing motion,
the LED bar graph will flash for five seconds during the speed
adjustment. When the swing timer expires, the swing stops and
the Speed Selector and Timer LEDs turn OFF.
– 30 –