Jenn-Air PRO-STYLE JGRP430 Instructions D'installation page 26

5. Remove the oven bake burner screws and oven bake burner
and gently set aside.
D
C
A. Oven bake burner
B. Oven bake burner screws
C. Oven bake burner electrode bracket
D. Oven bake burner electrode
6. Lift up clip on the oven bake burner electrode bracket with a
finger or flat-blade screwdriver and pull away the electrode.
B
A
A. Oven bake burner electrode bracket
B. Electrode bracket clip
26
7. Pull electrode out of bracket.
A
A
B
8. Apply masking tape to the end of a 7 mm nut driver to help
hold the gas orifice spud in the nut driver while changing it.
Insert nut driver into the gas opening and press down onto
the gas orifice spud and remove by turning the gas orifice
spud counterclockwise and lifting out. Set gas orifice spud
aside.
9. Gas orifice studs are stamped with a letter and a number.
Install the Number 154 oven bake burner orifice spud.
10. Place LP gas orifice in plastic parts bag for future use and
keep with package containing literature.
A
B
A. Grasp electrode here.
B. Bracket
A
A. Gas orifice spud