Jenn-Air PRO-STYLE JGRP430 Instructions D'installation page 23

6. Remove the oven bake burner screws and oven bake burner
and gently set aside.
A
A. Oven bake burner screws
B. Oven bake burner
C. Oven bake burner electrode bracket
D. Oven bake burner electrode
7. Lift up clip on the oven bake burner electrode bracket with a
finger or flat-blade screwdriver and pull away the electrode.
A. Oven bake burner electrode bracket
B. Electrode bracket clip
D C
B
B
A
8. Pull electrode out of bracket.
A
B
A. Grasp electrode here.
B. Bracket
9. Apply masking tape to the end of a 7 mm nut driver to help
hold the gas orifice spud in the nut driver while changing it.
Insert nut driver into the gas opening and press down onto
the gas orifice spud and remove by turning the gas orifice
spud counterclockwise and lifting out. Set gas orifice spud
aside.
A
A. Gas orifice spud
23