Maintenance And Cleaning - Orbegozo RMB 1000 Mode D'emploi

RMB 1000 RMB 1010
MANUAL
 Make sure the power control is in position "OFF".
 Connect the device to the network.
 Turn the thermostat control knob in the direction of clockwise into position maximum.
 Turn the power selector to the desired position .
o Position : Minimum power (500W)
o Position : Maximum power (1000W)
o Position OFF: Power off.
 When the room temperature is desired, turn the thermostat control counter clockwise to your
needed position until you hear "click". Leave command in that position, and the thermostat will
automatically maintain the selected temperature, initiating a series of connections and
disconnections.
 When not using the unit, turn the power switch to "0" (OFF) and disconnect the network
device.

MAINTENANCE AND CLEANING

 Before cleaning, make sure the appliance is disconnected from the network.
 Cool hot parts.
 It is important to keep the grilles clean for keeping a suitable air evacuation. Use a vacuum
cleaner to clean it.
14