Electrical Connections - Endress+Hauser PROline prowirl 72 Mode D'emploi

<
8

Electrical connections

➀
Fig. 1: Electrical connections Prowirl 72 resp. Prowirl 73
➀
= Ground terminal for potential equalisation
➁
= Ground terminal in the wiring compartment
Caution!
• Ground potential equalisation must exist between the safe and hazardous area.
• The transmitter is to be securely connected to the potential equalization system using
either the transmitter's esternal screw terminal ➀, or the ground terminal ➁ in the
wiring compartment.
Alternatively, the sensor and the transmitter (compact version) or the connection
housing can be connected to the potential equalization system via the pipeline when a
ground connection according to regulations can be assured.
The table below contains the values that are identical for all versions, irrespective of
the type code:
Transmitter Prowirl 72***-******3/C/F****W; Prowirl 73***-******3/C/F****W
Terminals
Designation
Safety-related values
Transmitter Prowirl 72***-******3/C/F****A; Prowirl 73***-******3/C/F***A
Terminals
Designation
Safety-related values
A
Esc
- +
E
1 (+)
Power supply / 4...20 mA HART
≤ 36 V (U
1 (+) 2 (–)
Power supply / 4...20 mA HART
≤ 36 V (U
= 250 V)
max
PROline Prowirl 72/73
A
➁
1 2 3 4
2 (–)
= 250 V)
max
3 (+) 4 (–)
Optional
Pulse /Status output
≤ 36 V (U
= 250 V)
max
Endress+Hauser