How To Disassemble The Zaaz High Chair - Nuna zaaz Mode D'emploi

How to Disassemble
the ZAAZ high chair
Remove the Tray
1 Release the clip from both sides under the tray.
2 Gently lift the tray upwards so that it clears the arm bar then pull away
from the back of the seat.
Remove the Arm Bar
1 Push the button on the arm bar front center attachment and pull the arm
bar up to release it from the seat.
2 Unhook the two ends from the backrest and remove.
When removing the arm bar for cleaning, ensure that
the arm bar is securely reassembled when placing it
back on the high chair. Refer to "Assemble Arm Bar
onto Seat."
Remove the Harness Restraint
WARNING
must always wear the harness restraint correctly fitted
and adjusted.
The harness can be removed for cleaning or when the ZAAZ high chair is
used for an older child.
Insert the Nuna key into each of the slots of the harness restraint at the
back and underside of the seat to release the plastic clips. Pull on the belts
( 12 )
to remove.
( 10 )
When used as a high chair, the child
( 9 )
( 6 )
15