Table des Matières
Publicité
Physikalisch-Technische Bundesanstalt
Braunschweig und Berlin
Test Report PTB Ex .......................
(1)
(2)
Equipment and Protective Systems Intended for Use
in Potentially Explosive Atmospheres – Directive 94/9/EC
(3)
EC Type Examination Certificate Number
(4)
Equipment:
(5)
Manufacturer:
(6)
Address:
(7)
This equipment and any acceptable variations thereof is specified in the schedule to this
certificate and the documents referred to therein.
(8)
The Physikalisch-Technische Bundesanstalt, certified body number 0102 in accordance with
Article 9 of the Council Directive 94/9/EC of 23 March 1994, certifies that this equipment has
been found to comply with the Essential Health and Safety Requirements relating to the design
and construction of equipment and protective systems intended for use in potentially explosive
atmospheres specified in Annex II to the Directive.
The examination and test results are recorded in confidential report: PTB Ex 98-28184.
(9)
Compliance with the Essential Health and Safety Requirements has been assured by compliance
with
EN 50014: 1997
(10) If the sign "X" is placed after the certificate number, it indicates that the equipment is subject to
special conditions for safe use specified in the schedule to this certificate.
(11) According to the Directive 94/9/EX, this EX TYPE EXAMINATION CERTIFICATE relates
only to the design and construction of the specified equipment. If applicable, further requirements
of this Directive apply to the manufacture and supply of this equipment.
(12) The marking of the equipment shall include the following:
Zertifizierungsstelle Explosionsschutz
By order
(Signature)
The results laid down in this test report refer exclusively to the test object and the technical documentation submitted. Test reports without signature
and seal are invalid. This test report may be reproduced unaltered only. Extracts or amendments shall require the prior approval of the Physikalisch-
Ptb08-4746.doc
14-18
T R A N S L A T I O N
EC TYPE EXAMINATION CERTIFICATE
PTB 98 ATEX 2114
Model 4746-2 and 4746-3 Limit Switches
SAMSON AG
Weismüllerstr. 3, D-60314 Frankfurt
EN 50020: 1994
(Seal)
Physikalisch-Technische Bundesanstalt – Bundesallee 100 - D 38116 Braunschweig
[Federal logo]
II 2 G EEx ia IIC T6
Technische Bundesanstalt.
Braunschweig, 03.09.1998
EB 8365 FR
Publicité
Table des Matières
