Télécharger Imprimer la page

Makita PDC1200 Manuel D'instructions page 11

Support d'alimentation portable
Masquer les pouces Voir aussi pour PDC1200:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
Do not throw the battery in fire
Do not short-circuit the battery.
Only for EU countries
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material! In observance of the
European Directives, on Waste Electric
and Electronic Equipment and Batteries
and Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
SAFETY WARNINGS
Portable power pack safety
warnings
1.
Be sure to read the instruction manual of the
tool or machine before use.
2.
Do not pick up or carry this unit by holding
only the cord. Do not pull the cord while you
are wearing or using this unit.
3.
Before wearing the unit, remove the socket
from the tool or machine.
When you leave the tool or machine, be sure to
4.
remove the socket from the tool or machine, or
remove the unit from your body.
Be careful not to trip over the cord during
5.
operation.
6.
Do not use this unit on an unstable surface, or
unstable high places.
7.
During operation, keep the cord away from
obstacles. The cord caught by obstacles may
cause serious injury.
8.
Do not insert the adapters into the charger.
9.
Inspect the unit including cords and harness
before use. If they are damaged, ask your local
Makita Authorized Service Center for repair.
10. When attaching the cord to the cord holder, be
sure to attach it slowly and securely.
Always make sure that the tool or machine is
11.
switched off and the socket is removed before
attempting to perform inspection or mainte-
nance of the tool or machine.
12. When using this unit with a tool equipped with
a blade, be sure to keep the cord away from
the blade.
13. When wearing the unit, do not put on anything,
such as safety harness or shoulder belt, which
may interfere the emergency detachment func-
tion of the unit.
14. Do not use this unit while you are climbing up
in a tree.
15. Do not use this unit when you are wearing
cordless fan jacket or cordless heated jacket.
16. Do not expose this unit to sparks.
17. When using this unit without wearing it or
installing the unit to the tool or machine, be
sure to lay down the unit.
18. Do not disassemble, repair, or modify the unit.
19. Be careful not to entangle the harness or belt
by the tool or machine.
20. When using the unit, be careful not to cut the
cords with the tool or machine.
21. When you stand the unit upright using the
battery stand, be sure to place the unit on the
flat surface.
22. Keep foreign objects such as metal chips and
water away from the plug of the unit.
23. Do not use the tool or machine near high-volt-
age power lines.
24. Use the charger dedicated to the unit only. Do
not use other chargers.
25. Do not damage the case of the battery or place
anything on the unit.
26. Do not step on the unit or sit on the unit.
27. Do not carry the unit by holding the battery
stand or width adjustment belt.
28. Store the unit indoors.
29. Do not put or fix anything between the battery
and battery stand.
30. Do not hang anything from the battery stand.
Important safety instructions for
battery
1.
Before using battery, read all instructions and
cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2.
Do not disassemble battery.
If operating time has become excessively
3.
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5.
Do not short the battery:
Do not touch the terminals with any con-
(1)
ductive material.
(2)
Avoid storing battery in a container with
other metal objects such as nails, coins,
etc.
(3)
Do not expose battery to water or rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
6.
Do not store and use the tool/machine and
battery in locations where the temperature
may reach or exceed 50 °C (122 °F).
7.
Do not incinerate the battery even if it is
severely damaged or is completely worn out.
The battery can explode in a fire.
8.
Be careful not to drop or strike battery.
9.
Do not use a damaged battery.
11 ENGLISH

Publicité

loading