Positioning The Speakers - Sony HST-471 Mode D'emploi

WIDE mode
Select WIDE mode if you have front and rear
speakers and a large center speaker. With
this mode, you can take full advantage of
Dolby Surround sound.
Center speaker
Front
speaker
(L)
Rear
speaker
(L)
3CH mode
Select 3CH (3 channel logic) mode if you have
front and center speakers but no rear
speakers. The sound of the rear channel is
output from the front speakers to let you
experience some of the surround sound
without using rear speakers.
Center speaker
Front
speaker
(L)
PHANTOM mode
Select PHANTOM mode if you have front
and rear speakers but no center speaker. The
sound of the center channel is output from
the front speakers.
Front
speaker
(L)
Rear
speaker
(L)

Positioning the speakers

Before you connect them, determine the best
location for your speakers.
1
Front
speaker
(R)
Front
speaker
Rear
(L)
speaker
(R)
Rear
speaker
(L)
2
Front
speaker
(R)
Front
speaker
(R)
Rear
speaker
(R)
Place the front speakers at the angle
of 45 degrees from your listening
position.
Center speaker
45°
Place the center speaker so it is
placed at about the same height as
the front speakers (A). Align the
center speaker with the front
speakers or place it a little backward
from the front speakers' position
(B).
A
B
Center speaker
Front
speaker
(R)
Rear
speaker
(R)
continued
EN
9