Test Mode - NAMCO TIME CRISIS III SD Manuel De L'opérateur

5-2

Test Mode

1. Open the coin door and slide the test switch "ON". The "Menu Screen" will be
displayed on the monitor.
2. Select the test required by using the select up/down switch. The colour of the
selected test will change.
3. Activate the test by pressing the Enter switch. Select "EXIT" in each test to return
to the "Menu Screen".
4. After testing is completed, slide the test switch to the "OFF" position to return to
normal game mode.
The Test Switch must always be in the "OFF" position for normal game mode.
COIN OPTIONS
GAME OPTIONS
I/O TEST
MONITOR TEST
SOUND TEST
BOOKKEEPING
OTHERS
LINK MALFUNCTION 1 2 3
GAME DIFFICULTY L/R:NOT THE SAME
The internal battery01 is dead.
The internal battery02 is dead.
SELECT SW:CHOOSE ENTER SW:ENTER
(a) Link Errors
An error message will appear if there is a malfunction in the Link system. The
number at the right of the message indicates the error type.
Numbers "1" and "2" indicates faults in a PCB (game PCB or I/O PCB).
When these error numbers are shown, contact your distributor.
Number "3" indicates that the software versions of the left and right game PCBs
do not match.
When these error numbers are shown, contact your distributor.
(b) The difficulty settings for player 1 and player 2 do not match.
(see section 5-2-2 page 48 for adjustment)
(c) This item is only displayed when the battery is faulty. Contact your distributor.
MENU
Page 44
Used to set the price of play
Used to set the game options
Used for testing guns, switches, lamps
Used for setting the monitor
Used for setting the volume
Used to view bookkeeping
Used for testing the PCB
(a)
(b)
see notes below
(c)