Replacing The Header Tube And Starter - NAMCO TIME CRISIS III SD Manuel De L'opérateur

6-7

Replacing the Header Tube and Starter

1. Remove 10off security screws (M5x12), and remove the Header Acrylic.
Header Acrylic
Red Neon
2. Replace the Fluorescent Tube or Starter.
Note: The fluorescent tube is fitted with a blue filter. Remove the filter and fit to
the new fluorescent tube before refitting the tube to the Header Assy.
3. Replace the Starter.
4. Reassemble in reverse order.
Neon Lamp
Driver PCB
Page 70
Security screw
(M5x12)
Blue Neon
Neon Lamp
Driver PCB
Fluorescent Tube
Starter