Replacing The Pedal Switch - NAMCO TIME CRISIS III SD Manuel De L'opérateur

6-1

Replacing the Pedal Switch

1. Remove 4off security screw (M5x12) and remove the switch cover plate.
Security screw (M5x12)
2. Remove 2off pozi head screw (M3x16) and remove the switch.
When replacing the switch, ensure that the wires are fitted to the correct
terminals.
3. Slacken the 2off whizztite nuts (M4) and adjust the microswitch bracket so that
the switch plunger operates the switch correctly without bending the switch lever
against the switch body.
Foot plate
4. Refit the switch cover plate and 4off security screw (M5x12).
Switch plate
Pozi head screw (M3x16)
Microswitch
pedal
released
Whizz nut
Pedal
pressed
Page 57
Microswitch
Plunger