Replacing The Flexible Gun Conduit - NAMCO TIME CRISIS III SD Manuel De L'opérateur

6-5-6

Replacing the Flexible Gun Conduit

1 Remove the Gun Assy.
2. Remove 2off security screw (M4x10) and remove the Connector Cover.
3. Remove the Gun Covers
4. Detach the Solenoid Bracket, Solenoid Connectors and earth wire.
5. Disconnect the PCB connectors and detach the Fast-On connectors from
the microswitch.
6. Remove 1off button head screw (M4x10) fixing the Conduit to the Gun
Cover and detach the Conduit.
Earth wire
Pozi head screw (M3x8)
PCB connectors
Flexible Conduit
7. Reassemble in reverse order.
(see 6-5-1 page 61)
(see 6-5-3 page 63)
Fast-On terminals
(microswitch)
Button head screw
(M4x10)
Gun Cover L
Page 66
Security screw (M4x10)
Connector Cover
Connector