Test Mode - NAMCO POINT BLANK 2 Manuel De L'opérateur

4-2

Test Mode

1. Open the coin door and slide the test switch "ON". The "Menu Screen" will be
displayed on the monitor.
2. Pressing the Player 1 switch will step through the tests and pressing Player 2
switch will select the test.
3. After testing is completed, select Exit & Save and press P2 Start switch to save
the data of the items changed. The machine exits the test mode and returns to
normal game operation. Slide the Test switch OFF.
Note: If the test mode is is not ended as described above , any changes made during
the tests will not be saved. (You cannot finish the Test Mode by simply sliding
the Test Switch Off.
COIN OPTIONS ..........................................................................
GAME OPTIONS ........................................................................
SWITCH TEST ...........................................................................
LAMP & BLOWBACK TEST .......................................................
MONITOR TEST .........................................................................
SOUND TEST .............................................................................
DATA CLEAR ..............................................................................
GUN INITIALIZE .........................................................................
EXIT & SAVE ..............................................................................
CHOOSE
ENTER
(a) Sets price of play.
(b) Sets the game options.
(c) Test the switches.
(d) Tests the lamps and gun blowback (recoil).
(e) Allows testing and set-up of the monitor.
(f) Adjusts the sound volume.
(g) Initializes the stored bookkeeping data.
(h) Sets gun aim alignment
(i) Returns to normal game screen
MENU
: P1 START
: P2 START
Page 39
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)