Adjusting The Level Adjusters - NAMCO POINT BLANK 2 Manuel De L'opérateur

3-2

Adjusting the Level Adjusters

1. When the game is in its final position, lower the four (4) level adjusters with a
spanner so that the game is level and all castors are raised from the floor by
approximately 5mm. Tighten the lock nuts with a spanner to ensure that the level
adjusters do not move in game play.
Note: If the location site of this game has a polished floor, it is recommended that
rubber pads are fitted under the level adjusters to prevent the game from sliding
on the floor.
Page 36