Technical Data - Berner BHFL60A Mode D'emploi

All manuals and user guides at all-guides.com
performance and the life of the battery. Please note that the battery at this stage
developed explosive gas.
After finishing the reactivation the acid level of the battery must be checked and
optionally refilled with distilled water. the activation generally leads to a loss of fluid
in the battery.
In the "reactivation" switches the charger after removing the Battery clamps
from the battery not automatically on error. On the charger clamps, the
charging voltage is still displayed. The next time you reconnect the charger
clamps to a battery can not be recognized a reverse battery! Therefore the
charging process is to interrupt by pressing the „STOP" button before
reconnecting to a battery.
Nominal voltage
Current consumption
Charging voltage
Float Charging Voltage
Service Mode Voltage
Reactivation Voltage
Max. charging current
Minimum battery voltage
Operational temperature
Cooling
Charging characteristic
Battery types
Battery capacity
Weight (without charging power)
On charge or service operation the battery must have at least 3V to enable the
charger to start.
The quality of output voltage and current of a charger is very important. Undesired
variations and ripples lead to warming up and to wear the positive terminal.
The Berner battery charger are characterised by a very clean tension and current.

TECHNICAL DATA

90 V – 264 V 47-63 Hz
8,2 A (by maximum charging current)
14-15 V (± 0,3%) adjustable
min. 13.3 V (± 0,3%)
13,9 V ( 0,3%) adjustable
max.15,5 V ( 0,3%)
60 A (12 V) ± 3%
3 V
-20°C – 50°C
Fan controlled by temperature
IUoU
Lead-Acid, Lead-GEL, AGM
25-600 Ah
2,6 kg
22