Product Description And Specifications; Technical Data - Berner BACCF 36V Notice Originale

Product description and
specifications
English
Intended use
English
The battery charger is intended for charging the
rechargeable Berner Li-Ion batteries.
Product Features
English
The numbering of the components shown refers
to the diagram of the charger on the graphics
page.
(1) Rechargeable battery
(2) Green battery charge indicator
(3) Red battery charge indicator
(4) Charging bay
(5) Battery charge indicator
(6) Temperature monitoring indicator
(7) Cord wrap
A) Accessories shown or described are not included
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.

Technical Data

English
Charger
Article number
Battery charging voltage
(automatic voltage de-
tection)
Charge current
Permitted charging tem-
perature range of the re-
chargeable battery
Standard batteries:
Charging time at battery
capacity, approx.
– 1.3 Ah
– 1.5 Ah
– 2.0 Ah
– 3.0 Ah
– 4.0 Ah
– 5.0 Ah
– 6.0 Ah
Number of battery cells
Weight according to
EPTA-Proced-
ure 01:2014
Protection class
8 | English
A)
A)
A)
BACCF 36V
409 369
V 14.4–36
A 8.0
°C 0–45
80 %/100 %
min 10/25
min 10/25
min 15/30
min 20/35
min 25/35
min 35/45
min 35/55
4–30
kg 0.82
/ II
Operation
English
Start-up
English
Note the mains voltage! The voltage of the
u
power source must match the voltage specified
on the rating plate of the charger. Chargers
marked with 230 V can also be operated with
220 V.
Charging process
English
The charging process begins as soon as the
mains plug for the charger is inserted into the
mains socket and the battery (1) is inserted into
the charging slot (4).
Thanks to the intelligent charging process, the
charge condition of the battery is automatically
detected and then charged up with the optimal
charge current depending on battery temperature
and voltage.
In this way, the battery is treated with care and re-
mains permanently fully charged when it is stored
in the charger.
What the display elements mean
Flashing green battery charge level indicator (2)
The rapid-charging procedure is indic-
ated by flashing of the green battery
charge level indicator (2). The battery
can be removed at any time and used.
Note: The charging process is only possible when
the temperature of the battery is within the permit-
ted charging temperature range, see section
"Technical data".
Continuously illuminated green battery charge
level indicator (2)
English
The continuous light of the green bat-
tery charge level indicator (2) signals
that the battery is fully charged.
The battery can then be removed for
immediate use.
When there is no battery connected, the continu-
ous light of the battery charge level indicator (2)
indicates that the mains plug is plugged into the
mains socket and that the charger is ready to be
used.
Continuously illuminated red battery charge
level indicator (3)
English
The continuous light of the red battery
charge level indicator (3) shows that
the temperature of the battery is out-
side of the permitted charging temper-
ature range, see section "Technical data". The
charging process begins as soon as the permitted
temperature range has been reached.
English
English
1 609 92A 5RA • 24.7.20