Worx WX638 Notice Originale page 7

TECHNICAL DATA
Type wx638 wx638.1 wx640 wx640.1(635-644-designation of machinery,
representative of Finishing sander)
Voltage
Power input
No load speed
Base size
Orbital diameter
Protection class
Machine weight
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K &K
PA WA
Wear ear protection when sound pressure is over
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
wARNINg: WARNING: The vibration emission value during actual use of the power
tool can differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
wARNINg: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
Finishing sander
wx638 wx638.1
230-240V~50Hz
260W
6000-12000/min
90x187mm
Vibration emission value a
Uncertainty K = 1.5m/s²
wx640 wx640.1
220W
12000/min
1.6mm
/II
2.0kg
= 3.5m/s
2
h
L :75.7dB(A)
pA
L :86.7dB(A)
wA
3.0dB(A)
80dB(A)
7
EN