SilverCrest SLE 200 A1 Guide Abrégé page 15

Handling and operation
This section provides you with important information on handling and using the
appliance.
Switching the appliance on/off
♦ Press the
You will hear a beep and the selected programme (
on the display w.
♦ Press the
You will hear a beep and the display w switches off.
NOTE
► The appliance always starts up with the last selected setting.
► If the appliance shuts down due to a power failure, it will automatically
restart with the last selected setting when power is restored.
♦ If a timer has been programmed, the appliance switches off permanently
after the specified time has elapsed (1–12 hours).
♦ If a relative humidity value has been set in the DEHUMIDIFICATION
programme, the appliance switches off once this value has been reached.
If the value is exceeded, the dehumidification switches back on again.
♦ When the water tank 6 is full, incorrectly inserted or removed, dehumidifi-
cation stops. The appliance will beep for approx. 20 seconds and
appear on the display w. The fan keeps going for approx. 3 minutes and
then switches off.
■ 12 │ GB │ IE
button z to switch on the appliance.
button z to switch off the appliance.
or ) will appear
will
SLE 200 A1